Skip to main content

IT onboarding and offboarding: the employee device and access checklist

Prepare the device and accounts before day one; at departure, recover the hardware, cut access, wipe the data, reassign or refurbish. With Windows commands.

Published 14 November 2026 · 5 min read

An employee's arrival and departure are the two moments when the IT fleet moves the most, and when the most information gets lost: a laptop returned without anyone recording it, an account left active for six months, customer files gone with the person. A simple checklist avoids these three accidents.

The short answer

At onboarding: prepare the device and accounts before day one, hand over the equipment in person and record it in the inventory. At offboarding: disable the accounts the same day, revoke sessions, recover the equipment, transfer the useful data, wipe the device, then decide: reassign, upgrade, refurbish or recycle. With a tool like LongLife, the condition of every device is known in advance: you know straight away which one to give the new starter and what to do with the one that comes back.

Onboarding, before day one

WhenActionWho
D-10Choose the device for the role: new, reassigned or refurbished (the LongLife health score shows which available devices are in good condition)IT and manager
D-7Create the accounts (directory, email) and access according to the roleIT
D-5Prepare the device: up to date, encrypted, business software installedIT
D-2Check licences and permissions (shared folders, applications)IT
D0Hand over in person, first password, security rulesIT or manager
D0Update the inventory: device, serial number, userIT

Prepare the device without spending the day on it

Two approaches depending on the size of the fleet:

  • With Windows Autopilot and Intune: the device is registered in the service and configures itself the first time the employee signs in with their work account (applications, settings, encryption). It can even be shipped straight to their home.
  • Without a management tool: start from a reset device, apply updates, install the business software and turn on encryption.

To check that a device is joined to the company directory, open a Command Prompt:

Command Prompt
dsregcmd /status

In the "Device State" section, AzureAdJoined : YES means a device joined to Microsoft Entra ID, DomainJoined : YES a device joined to an Active Directory domain.

And to check that the disk is encrypted before handover, in an elevated PowerShell:

PowerShell
manage-bde -status C:

The "Protection Status" line must show that protection is on. Remember to back up the recovery key: see our guide to the BitLocker recovery key.

Offboarding, on the day

WhenActionWhy
Last day, at leaving timeDisable the accountsCut access without losing data
Last dayRevoke open sessions (email, online applications)A session stays valid after the account is disabled
Last dayRecover all the equipment: device, charger, monitor, phone, badgeAvoid "lost" devices in the inventory
D+1 to D+15Transfer useful data (files, mailbox) to the managerKeep what belongs to the company
According to policyDelete the account and personal dataDo not keep more than necessary
Before reassignmentWipe the deviceThe next employee must find nothing

Disable the accounts

Depending on your setup, disable the local account on the device, the Active Directory domain account and the Microsoft Entra ID account, also cutting its open sessions. For Entra ID, everything can be done from the Microsoft Entra admin centre, without the command line.

Wipe the device

Before any reassignment: Settings > System > Recovery > Reset this PC, then Remove everything, and in the additional settings, turn on Clean data for the drive. The options are explained in detail in our guide to resetting a PC on Windows 11.

On personal data: the files and mailbox of an employee who has left contain personal data. Apply your retention policy and, if in doubt, consult your data protection officer or, in France, the recommendations of the CNIL (the French data protection authority).

After the departure: what to do with the device?

Device conditionDecision
Good condition, suitable for the next userReassign after wiping
Healthy but limited (disk, memory, battery)Upgrade, then reassign
Worn out or incompatible with Windows 11Refurbish for another use, or donate
Beyond useRecycle through an approved channel

Every departure is an opportunity to extend a device's life rather than buy a new one, the most effective action in Green IT for businesses. See also our definition of refurbished.

LongLife, every move under control

LongLife continuously follows the condition of each device: hardware, Windows end of support and security posture. At every arrival and every departure, you save time:

  • the right device for the new starter: the health score and each device's record tell you which one is ready and which one needs upgrading first;
  • a secure device from day one: encryption, antivirus, firewall and updates visible at a glance;
  • an immediate decision on the returned device: reassign as is, upgrade or replace, with the cost and CO₂e of each option;
  • a record of every intervention: on-site work order and history in the device's health log;
  • an inventory that keeps itself up to date: the device stays in the LongLife CMDB, always up to date.

Devices to repair or refurbish can be sent to the OPP! workshop in Nantes. The free plan covers up to 15 devices. To see LongLife on your fleet, book a meeting or first estimate the savings with the simulator. See also our method for an IT fleet inventory.

Sources

Frequently asked questions

What does IT need to do when an employee joins?

Before they arrive, prepare their device (configured, up to date, encrypted), create their accounts and access according to their role, and plan their licences. On day one, hand over the equipment in person, check they can sign in and explain the security rules.

What does IT need to do when an employee leaves?

Disable their accounts as soon as they leave, revoke their sessions and access, recover all the equipment, transfer the data the company needs, then wipe the device before reassigning, refurbishing or recycling it.

Should you delete the account of an employee who leaves?

Disable it first rather than deleting it. Disabling cuts access immediately while keeping the data long enough to transfer what needs to be transferred. Deletion comes later, according to your retention policy.

How do you wipe a computer before reassigning it?

Use "Reset this PC" with the "Remove everything" option and drive cleaning. On a disk encrypted with BitLocker, wiping is all the safer because the data stays unreadable without the key.

How much longer can your fleet last?

The simulator estimates in one minute the budget and CO₂ saved by extending your renewal cycle.

Read next