Skip to main content

Keep, upgrade or replace: decide device by device

LongLife proposes the right option for every device, with its cost and CO2e. You track the total cost of ownership (TCO) per device and for the organisation, and you refresh at the right time, not on a fixed date. Free up to 15 devices.

Lifecycle and TCO, in brief

Many companies refresh their devices by age bracket, on a fixed date, whatever their condition. This rule throws away good devices and keeps worn-out ones. It also makes the budget hard to defend, since nobody knows what each device really costs.

TCO (total cost of ownership) measures what a device costs over its lifetime, not just its purchase price. Linked to the real condition of the hardware, it lets you decide device by device whether to keep, upgrade or replace.

LongLife proposes the right option for every device, with its cost and CO2e, and advises replacing when an upgrade is no longer worth the cost. TCO is calculated per device and for the organisation, and you prepare your renewal batches by site, department or group. Lifecycle and TCO live in the same platform as DEX, device health and inventory.

The definition of TCO in the glossary

How it works

  1. 1.

    The agent records the hardware condition

    Memory, disk, battery and components at end of life are tracked on each device, based on its real condition.

  2. 2.

    You enter the costs

    Purchase price and resale value are entered on each device record.

  3. 3.

    LongLife recommends

    For every device: keep, upgrade or replace, with the cost and CO2e of each option.

  4. 4.

    You plan

    You prepare your renewal batches by site, department or group, and track the organisation's TCO.

A recommendation for every device

Based on the real condition of the hardware, LongLife proposes to keep, upgrade or replace every device. A device in good condition stays in service, at no cost. When one part is holding it back (memory, disk or battery), LongLife prices the upgrade and its effect on the device.

When the device is no longer worth the spend, replacement is advised, with its cost and CO2e. You can then compare the spend and the environmental impact of each option, device by device.

  • Keep: the device stays in service, at no cost
  • Upgrade: memory, disk or battery, priced
  • Replace: with its cost and CO2e
The recommendation for a deviceLongLife
  • Keep
  • Upgrade
  • Replace
  • Cost of each option
  • CO2e of each option

A clear rule for renewal

The recommendation follows a clear logic that you can explain to management. When an upgrade is no longer worth the cost compared with a new device, LongLife advises replacing it. The same goes when too many components reach end of life on the same device.

Otherwise, LongLife proposes to keep or upgrade. When someone asks why that device, the answer fits in one sentence.

  • Replacement advised when an upgrade is no longer worth the cost
  • Or when too many components reach end of life
  • Cost and CO2e shown for each option
The renewal ruleLongLife
  • Upgrade no longer worth the cost: replace
  • Too many components at end of life: replace
  • Otherwise: keep or upgrade

TCO per device and for the organisation

The total cost of ownership of every device and of the whole fleet, with no spreadsheet. Purchase price and resale value are entered on each device record; LongLife calculates TCO per device, per model, per site and for the fleet, to spot the most expensive devices.

ROI puts a figure on what an upgrade brings compared with a replacement. You prepare the budget on device-by-device figures, and you can defend it.

  • TCO per device, per model and per site
  • Organisation TCO
  • ROI of upgrading compared with replacing
Fleet costsLongLife
  • TCO per device
  • TCO per model
  • TCO per site
  • Organisation TCO
  • ROI of the upgrade

Renewal batches by site, department or group

Move from device-by-device decisions to an action plan. Prepare your renewal batches by site, department or group, to plan purchases instead of replacing devices piecemeal.

Even before installing the agent, the ROI and CO2 simulator gives a first estimate for your fleet. And for the devices worth saving, the OPP! workshop in Nantes repairs, micro-solders and refurbishes.

Estimate your savings with the ROI and CO2 simulator

  • Renewal batches by site, department or group
  • ROI and CO2 simulator
  • Repair and refurbishment at the OPP! workshop in Nantes

What you gain

  • Refreshes decided on the real condition of the hardware, not by age bracket.
  • Trade-offs that are easy to justify, thanks to an explicit rule.
  • A budget built on the real cost of each device, not on averages.
  • A purchase plan with an overall view and a calendar.

Frequently asked questions about lifecycle and TCO

What is the TCO of a workstation?

TCO (total cost of ownership) measures what a device costs over its lifetime, not just its purchase price. LongLife calculates it for every device and for the organisation.

When does LongLife advise replacing a device?

When an upgrade is no longer worth the cost compared with a new device, or when too many components reach end of life. Otherwise, LongLife proposes to keep or upgrade, with the cost and CO2e of each option.

Which upgrades are proposed?

Memory, disk and battery, priced device by device.

Can renewals be prepared by site?

Yes. Prepare your renewal batches by site, department or group.

How can we estimate savings before starting?

The ROI and CO2 simulator gives a first estimate for your fleet. Once the agent is installed, LongLife prices every device based on its real condition.

How much does LongLife cost?

LongLife is free up to 15 devices. Beyond that, the plan depends on the number of devices: a meeting lets us prepare a suitable offer.

Other LongLife solutions

Refresh at the right time, not on a fixed date

A first meeting to understand your context, then a pilot on your fleet, defined with you. Free up to 15 devices.