How to enable TPM 2.0: check the chip and turn it on in UEFI (Dell, HP, Lenovo)
Windows 11 requires TPM 2.0, often present but disabled. Check it in one command, enable it in UEFI by brand (Intel PTT, AMD fTPM), BitLocker precautions.
Updated 14 November 2026 · 4 min read
"This PC doesn't currently meet Windows 11 system requirements": in many cases the culprit is not the hardware but a setting. The TPM 2.0 chip is there, built into the processor, and simply disabled in the UEFI. Five minutes is enough to check it and turn it back on.
The short answer
To enable TPM 2.0: first check its state with tpm.msc or the PowerShell command Get-Tpm. If it is missing, restart into the UEFI, open the security menu and enable Intel PTT (Intel processors) or AMD fTPM (AMD processors), then save. On a device whose processor is compatible with Windows 11, the chip is almost always already there. To run the migration across the whole fleet, LongLife continuously tracks the Windows version and end of support of every device.
What the TPM is, in two sentences
The TPM (Trusted Platform Module) is a security chip that stores encryption keys and checks that the device's boot process has not been tampered with. Windows 11 requires version 2.0, in particular for BitLocker and Windows Hello.
For several generations now, it has not necessarily been a separate chip: it is built into the processor. Intel calls it PTT (Platform Trust Technology), AMD calls it fTPM (firmware TPM). In practice, 8th generation Intel Core and later and AMD Ryzen 2000 and later all have it.
Step 1: check the TPM status
Graphical method. Press Windows + R and type:
tpm.mscThe "Trusted Platform Module (TPM) Management" console opens. Look at two things:
- Status: "The TPM is ready for use" means everything is fine;
- Specification Version, at the bottom right: it must show 2.0.
If the console shows "Compatible TPM cannot be found", the TPM is either missing or disabled in the UEFI.
Command-line method. Open PowerShell as administrator and run:
Get-TpmRead TpmPresent (Windows sees the chip) and TpmReady (it is ready for use). Both must be True.
To find the specification version:
Get-CimInstance -Namespace "root/cimv2/Security/MicrosoftTpm" -ClassName Win32_Tpm | Select-Object SpecVersion, ManufacturerVersion, IsEnabled_InitialValueThe first number in SpecVersion is the version: 2.0 is what Windows 11 requires, 1.2 is not enough.
| Result | Meaning | What to do |
|---|---|---|
| TpmPresent and TpmReady True, version 2.0 | Everything is in order | Nothing |
| TpmPresent False | TPM disabled or missing | Step 2: enable it in the UEFI |
| TpmPresent True, TpmReady False | TPM present but not initialised | Restart; if needed, initialise from tpm.msc |
| Version 1.2 | Old chip | Check whether the UEFI offers the processor's TPM, otherwise the device is incompatible |
Step 2: enable the TPM in the UEFI
Enter the UEFI from Windows, without hunting for the right key at startup: in an elevated Command Prompt, run
shutdown /r /fw /t 0The device restarts straight into its UEFI. Another route: Settings > System > Recovery > "Advanced startup", then Troubleshoot > Advanced options > UEFI Firmware Settings.
Find the option in the security menu. Names vary by brand and model:
| Brand | Where to look | Option name |
|---|---|---|
| Dell | Security | "TPM 2.0 Security", tick "TPM On" |
| HP | Security | "TPM Embedded Security", state "Enabled" or "Available" |
| Lenovo ThinkPad | Security, then Security Chip | "Security Chip", select "Enabled" |
| Lenovo IdeaPad | Configuration or Security | "Intel Platform Trust Technology" or "AMD fTPM" |
| Intel motherboard (other brands) | Advanced, Security or PCH-FW | "Intel PTT" or "Platform Trust Technology" |
| AMD motherboard (other brands) | Advanced, Security or AMD CBS | "AMD fTPM" or "Firmware TPM" |
Enable the option, save and exit (often F10). On restart, the UEFI may ask for confirmation: accept it. Then run Get-Tpm again to check.
The BitLocker precaution
Enabling the TPM loses nothing. However, clearing it ("Clear TPM" in the UEFI or in tpm.msc) deletes the keys it holds. On a disk encrypted with BitLocker, the device will then ask for the recovery key at startup. Before any change to the TPM on a device that is already encrypted:
- Write down the device's BitLocker recovery key.
- Suspend BitLocker for one restart, in an elevated PowerShell:
Suspend-BitLocker -MountPoint "C:" -RebootCount 1Next: Secure Boot
Windows 11 also requires Secure Boot, which is set in the same UEFI. If your device needs it, follow our guide to enabling Secure Boot straight away, then run the compatibility check again. For the full device-by-device approach, read our article on moving from Windows 10 to Windows 11.
LongLife: the Windows 11 migration managed device by device
Enabling the TPM is done device by device. Running the migration of a whole fleet needs an overview, and that is what LongLife gives you:
- the dashboard tracks the share of the fleet already on Windows 11, and what is left to do;
- each device's record shows its Windows version, its end-of-support date and the number of days left;
- the real state of the hardware: processor, memory, disk, battery, health score;
- a costed recommendation for each device: keep it, upgrade it (memory, SSD, battery) or replace it, with the cost and CO₂e of each option, which can be grouped into batches by site or department.
Checking the TPM and Secure Boot is done with the commands in this guide; the rest of the migration is managed in LongLife. The free plan covers up to 15 devices. Book a meeting to see your fleet in LongLife, or estimate what upgrading would save you with the simulator.
Sources
- Microsoft, enable TPM 2.0 on your PC: support.microsoft.com
- Microsoft, Get-Tpm cmdlet: learn.microsoft.com
- Microsoft, Windows 11 specifications: microsoft.com
- Microsoft, Windows 11 supported processors: learn.microsoft.com
Frequently asked questions
How do I know if my PC has a TPM 2.0 chip?
Press Windows + R, type tpm.msc and press Enter. The console shows the module status and, at the bottom right, the "Specification Version". If it shows 2.0, the chip is present. If the console says no compatible TPM can be found, it is either missing or disabled in the UEFI.
Do I need to buy a TPM 2.0 chip to move to Windows 11?
Almost never. On a device whose processor is compatible with Windows 11, TPM 2.0 is built into the processor (Intel PTT or AMD fTPM). Enabling it in the UEFI is usually enough.
Where do I enable the TPM in the BIOS?
In the UEFI security menu. The option is called Intel Platform Trust Technology (PTT) on Intel processors and AMD fTPM on AMD processors. On Dell it is under "TPM 2.0 Security"; on HP, under "TPM Embedded Security"; on Lenovo ThinkPad, under "Security Chip".
Does enabling or clearing the TPM cause data loss?
Enabling it, no. Clearing it ("Clear TPM") deletes the keys it holds: if the disk is encrypted with BitLocker, the device will ask for the recovery key. Suspend BitLocker and write down the key before any change to the TPM.
How much longer can your fleet last?
The simulator estimates in one minute the budget and CO₂ saved by extending your renewal cycle.