Skip to main content

SMART

SMART (Self-Monitoring, Analysis and Reporting Technology) is built into hard drives and SSDs. Its wear and error counters help anticipate disk failure.

Updated on 14 November 2026

SMART definition

SMART (Self-Monitoring, Analysis and Reporting Technology) is a system built into almost every hard drive and SSD. The disk constantly monitors its own operation and keeps counters: bad sectors, read errors, temperature, number of hours of use and, for SSDs, the wear percentage of the memory cells.

These counters serve one purpose: to see a disk failure coming, one of the most painful failures there is, since it can take the user's data with it.

Across a whole fleet, LongLife does this monitoring for you: disk status feeds into the health grade of every computer, and weakening disks are flagged, with a costed replacement recommendation.

The indicators to watch

IndicatorWhat it signals
Wear (SSD)Share of the SSD's endurance already used up
Reallocated sectors (hard drive)Damaged areas replaced by spare areas
Uncorrected read errorsData the disk can no longer read back
TemperatureInsufficient cooling, clogged fan
Power-on hoursActual usage age of the disk

An error counter that rises from one week to the next is more worrying than a high but stable value.

A practical example

An SME technician receives a complaint: "my PC freezes for a few seconds several times a day". The disk counters show (illustrative figures) an SSD at 96% wear and rising read errors. The SSD is replaced before it fails, the data is copied, and the computer is good for several more years for the price of a disk.

Reading the state of a disk in Windows

In Windows 11, Settings > System > Storage > Advanced storage settings > Disks & volumes, then Properties on a disk, shows its health for NVMe SSDs: estimated remaining life, available spare and temperature. Check the overall health status of each disk, and for an SSD its wear. Depending on the model and driver, some values stay empty: this is normal, not every disk reports every counter to Windows. For the full detail of SMART attributes, use the disk manufacturer's tool.

What to do depending on the result

  • Healthy, low wear: nothing to do, check again in a few months.
  • High wear or rising errors: back up, then plan the disk replacement.
  • Disk reported as degraded: back up immediately and replace.

A tired disk is also a frequent cause of slowness, and therefore of a poor digital experience.

Monitoring the disks of the whole fleet with LongLife

Reading the disk counters on one computer takes a minute. Doing it every week on 80 computers, nobody does. LongLife takes care of it:

  • the disk status of every computer feeds into its health grade;
  • detectors analyse your fleet continuously and flag what is degrading, with the recommended action and the cost of doing nothing;
  • the decision is costed: replace the disk, upgrade the computer or replace it, with the cost and CO₂e of each option;
  • the repair can be handed to the OPP! workshop in Nantes, which publishes LongLife (repair, micro-soldering, refurbishing).

A new SSD costs a fraction of a new computer: spotting a weakening disk in time often saves both the computer and the data. To weigh repair against replacement, read our article on laptop lifespan.

The free plan covers up to 15 computers. Book a meeting to see your fleet in LongLife, or estimate the savings first with the simulator.

Sources

Frequently asked questions

What does SMART mean for a disk?

SMART stands for Self-Monitoring, Analysis and Reporting Technology. The disk measures its own condition (errors, wear, temperature, power-on hours) and makes it readable by the system.

How do you see the SMART status of a disk in Windows?

In Settings > System > Storage > Advanced storage settings > Disks & volumes, then Properties on a disk: Windows shows its health status and, for an NVMe SSD, the estimated remaining life and the temperature. For the full detail of the attributes, you need a dedicated utility or the manufacturer's tool.

Does a good SMART status guarantee that the disk will not fail?

No. SMART detects gradual wear well, but some failures happen without warning. It complements backups, it does not replace them.

When should you replace an SSD?

When its wear indicator approaches 100%, when errors appear or when the disk is reported as degraded. Replacing an SSD costs little compared with a new computer, and often gives the computer several more years of life.

How do you monitor the disks of a whole fleet?

By handing monitoring over to an agent. LongLife includes disk status in the health grade of every computer, flags those that are weakening and compares the cost of replacing the disk with replacing the computer. The free plan covers up to 15 computers.

Read also

See the real state of your fleet

LongLife measures the health of your Windows devices every day and recommends keeping, upgrading or replacing them, with the cost and CO₂e of each option.