Skip to main content

Common IT problems: the most frequent PC faults at work and how to fix them

Slow PC, stuck Windows Update, full disk, blue screen, Wi-Fi dropping out: the 12 most common workplace PC problems, the first check to run and the fix.

Published 14 November 2026 · 7 min read

A PC that crawls, an update stuck in a loop, a printer that stops responding: at work, the same faults come back again and again. They are rarely serious, but each one costs time, for the user and for whoever fixes it. This guide goes through them one by one, with the first check to run and, where one exists, our detailed guide.

The short answer

The most common IT problems on a Windows device are slowness, stuck updates, a full disk, a worn battery, overheating, restarts and blue screens, a frozen File Explorer, unstable Wi-Fi and the BitLocker recovery screen. In most cases, a real restart and one targeted check (disk space, battery report, event log) are enough to find the cause. Across a whole fleet, a tool like LongLife spots these problems device by device, continuously, without waiting for a user to call.

For the commands below, open PowerShell (right-click the Start menu, "Terminal"); where stated, choose "Terminal (Admin)".

The 12 most frequent PC problems

1. Slow PC or slow startup

This is the number one complaint. The usual culprits are programs launched at startup, a mechanical hard drive instead of an SSD, and too little memory. Check the disk type first: if MediaType shows HDD, moving to an SSD gives the biggest gain.

PowerShell
Get-PhysicalDisk | Select-Object FriendlyName, MediaType, Size, HealthStatus

Measuring startup, trimming startup programs and deciding between upgrade and replacement: see slow PC startup.

2. Windows Update stuck

An update stuck at 0% or failing in a loop is most often caused by a damaged update cache, a lack of disk space or corrupted system files. Start by checking whether a restart is pending (True = restart before anything else):

PowerShell
Test-Path "HKLM:\SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate\Auto Update\RebootRequired"

Resetting the components and error codes: see Windows Update stuck.

3. Full disk

A nearly full system disk slows Windows down and makes updates fail. Measure the free space, then turn on Storage Sense (Settings > System > Storage) and clear temporary files.

PowerShell
Get-Volume -DriveLetter C | Select-Object @{n='SizeGB';e={[math]::Round($_.Size/1GB,1)}}, @{n='FreeGB';e={[math]::Round($_.SizeRemaining/1GB,1)}}

If the disk is healthy but too small, a larger SSD costs far less than a new device. For wear on the disk itself, see our definition of SMART.

4. Battery draining too fast

A battery loses capacity with every charge cycle. Generate the Windows battery report and compare the current capacity (Full charge capacity) with the original one (Design capacity): below 80%, the loss of battery life becomes noticeable.

PowerShell
powercfg /batteryreport /output "$env:USERPROFILE\battery-report.html"

Reading the report and replacement thresholds: see test a laptop battery.

5. Overheating and noisy fan

A fan running loud means a heavily loaded processor or clogged vents. Find the processes that have used the most processor time, close those that serve no purpose, then have the vents cleaned if the noise continues when the device is idle.

PowerShell
Get-Process | Sort-Object CPU -Descending | Select-Object -First 10 Name, Id, CPU

A laptop resting on fabric or a sofa also overheats for lack of airflow: a hard surface is sometimes all it takes.

6. PC restarts by itself

Three causes dominate: an update restarting the device outside active hours, a power or battery cut, or a system error that triggers an automatic restart. The System log tells them apart: event 1074 shows a requested restart (and which program asked for it), 41 and 6008 an unexpected shutdown, 1001 a system error.

PowerShell
Get-WinEvent -FilterHashtable @{LogName='System'; Id=41,1074,6008,1001} -MaxEvents 20 |
  Select-Object TimeCreated, Id, ProviderName

7. Blue screen (BSOD)

A blue screen is Windows stopping on a serious error, with a stop code (for example CRITICAL_PROCESS_DIED). Write down the code, then look for the cause in the dump files: a recently updated driver, faulty memory or a failing disk are the usual suspects.

PowerShell
Get-ChildItem C:\Windows\Minidump | Sort-Object LastWriteTime -Descending

A single blue screen is no cause for alarm. If it comes back several times in a week, test the memory (mdsched.exe) and repair the system files (DISM /Online /Cleanup-Image /RestoreHealth then sfc /scannow, as administrator).

8. File Explorer not responding

Frozen taskbar, folders that will not open: File Explorer is stuck, often because of an unreachable network drive or a context menu extension. Restart it from Task Manager (right-click "Windows Explorer", Restart) or with a command:

PowerShell
Stop-Process -Name explorer -Force

If the taskbar does not come back by itself, run Start-Process explorer.exe. If the freeze returns, check network drives with net use.

9. Wi-Fi dropping out

Drop-outs often come from a weak signal, an old network adapter driver or power management switching the adapter off. Check the signal quality first, then, as administrator, generate the Windows Wi-Fi report, which traces recent Wi-Fi sessions and their disconnections.

Command Prompt
netsh wlan show interfaces
netsh wlan show wlanreport

The report is saved to C:\ProgramData\Microsoft\Windows\WlanReport\wlan-report-latest.html. If every device in the same room drops out, the access point is the problem, not the PCs.

10. BitLocker recovery screen

After a BIOS update, a hardware change or a change to boot settings, the device asks for a 48-digit key. It is stored in the Microsoft account, Entra ID, Intune or Active Directory. On a device that still starts, display it and back it up (as administrator):

Command Prompt
manage-bde -protectors -get C:

Where to find the key and how to stop the screen coming back: see BitLocker recovery key.

11. Printer not responding

First check that it is switched on, online and free of paper jams. If documents stay stuck in the queue, restart the print service (as administrator):

PowerShell
Restart-Service -Name Spooler

12. Forgotten password

Do not try a workaround: this is a job for IT support. On a work account, the administrator resets the password or, if your organisation has turned it on, you use self-service password reset from the sign-in screen.

Summary table

ProblemFirst checkDetailed guide
Slow PC, slow startupDisk type (Get-PhysicalDisk), startup programsSlow PC startup
Windows Update stuckPending restart, free spaceWindows Update stuck
Full diskGet-Volume -DriveLetter C, Storage SenseAbove
Battery drainingpowercfg /batteryreportTest a laptop battery
Overheating, noisy fanMost demanding processes, ventsAbove
Unexpected restartsSystem log (41, 1074, 6008, 1001)Above
Blue screenStop code, Minidump folderAbove
File Explorer frozenRestart Explorer, network drivesAbove
Wi-Fi dropping outnetsh wlan show wlanreportAbove
BitLocker screen48-digit key in the account or directoryBitLocker recovery key
PrinterPrint queue, Spooler serviceAbove
Forgotten passwordIT supportHelp desk

If nothing works and the device stays unstable, a reset is the last resort: see reset a PC with Windows 11. For a device still on Windows 10, whose support ended on 14 October 2025, plan the move to Windows 11 instead.

How to prevent them across a fleet

The guides above fix one device at a time, once the user has complained. With 30 or 300 devices, the real gain is seeing these problems coming. That is what LongLife does:

  • detectors that analyse your fleet continuously: battery, disk, memory, stability, LongLife flags what is getting worse without waiting for the user to call;
  • a health score per device and a fleet grade from A to F, plus a digital employee experience score (DEX) out of 100 covering startup, network, stability (blue screens) and user satisfaction;
  • a recommended action for every incident, with its priority and the cost of doing nothing: you know where to start;
  • remote fixes with a catalogue of signed scripts, written and tested by OPP! and expanded with every update, with a report for each device, without taking control of each machine;
  • the decision: keep, upgrade (memory, disk, battery) or replace, with the cost and CO₂e of each option, and repair available at the OPP! workshop in Nantes.

The free plan covers up to 15 devices. Estimate the time and money saved on your fleet with the simulator, or book a meeting to see your own devices in LongLife.

Sources

Frequently asked questions

What are the most common IT problems in a business?

The most frequent are a slow PC or slow startup, failing Windows updates, a full system disk, a battery that no longer lasts, overheating, unexpected restarts, blue screens, File Explorer not responding, Wi-Fi dropping out, the BitLocker recovery screen, printers and forgotten passwords.

How can I fix a computer problem myself?

First do a real restart (Restart, not Shut down), write down the exact error message, then run the first check for the symptom: disk space, battery report, event log. Most everyday faults are fixed this way in a few minutes, without reinstalling Windows.

When should I call IT support?

As soon as it involves a password, a BitLocker recovery key, a blue screen that keeps coming back or a fault affecting several devices at once. These cases need administrator rights or a view of the whole fleet.

How do you prevent PC problems across a whole fleet?

By watching the signals that come before a fault: a nearly full disk, a worn battery, saturated memory, blue screens, pending updates. With LongLife, detectors analyse your fleet continuously and show the action to take. The free plan covers up to 15 devices.

How much longer can your fleet last?

The simulator estimates in one minute the budget and CO₂ saved by extending your renewal cycle.

Read next