ERR_ INTERNET_ DISCONNECTED: what the error means and how to get back online (Chrome, Edge, Windows)
ERR_INTERNET_DISCONNECTED in Chrome or Edge means the device lost its connection. Checks, Windows commands and fixes, from Wi-Fi to the corporate VPN.
Published 14 November 2026 · 6 min read
Chrome's dinosaur or Edge's error page, with the same small code underneath: ERR_INTERNET_DISCONNECTED. The user thinks the website is down, when in fact their own device has lost the network. The good news: the cause can almost always be found in a few minutes, working up from the cable to the VPN.
The short answer
ERR_INTERNET_DISCONNECTED (or net::ERR_INTERNET_DISCONNECTED) means Chrome or Edge found that the device's internet connection was lost: the website has nothing to do with it. Check, in this order, the cable or Wi-Fi, airplane mode and the state of the network adapter, test the connection with Test-NetConnection, then run the network troubleshooter, renew the IP address and reset Winsock. In a company, also look at the VPN, the proxy and the firewall. With a tool like LongLife, the network quality of every device is tracked continuously and included in the DEX score: you know which devices drop off before users call.
What the code means
In Chromium's official list of network errors (Chromium is the engine behind Chrome and Edge), INTERNET_DISCONNECTED has the number -106 and is described as: the internet connection has been lost. Two related errors help narrow things down:
- ERR_NAME_NOT_RESOLVED: the network works, but the site's name could not be translated into an IP address. That is a DNS problem, covered in our ERR_NAME_NOT_RESOLVED guide.
- ERR_PROXY_CONNECTION_FAILED: the browser cannot reach the configured proxy server. Look at the proxy settings (step 4).
- ERR_NETWORK_CHANGED: the connection exists, but it changed while the page was loading (VPN, Wi-Fi switch). See our ERR_NETWORK_CHANGED guide.
Step 1: check the physical connection
- Ethernet cable firmly plugged in at both ends, link light on at the socket; or Wi-Fi connected to the right network.
- Airplane mode off: Settings > Network & internet > Airplane mode. On a laptop, a function key may have switched it on by mistake.
- Can another device on the same network reach the internet? If not, the problem lies with the router, the modem or the provider: restart them.
Step 2: check the state of the network adapter
Open PowerShell and list the network adapters:
Get-NetAdapter | Select-Object Name, InterfaceDescription, Status, LinkSpeedRead the Status column: Up means the adapter is connected, Disconnected that the cable is unplugged or the Wi-Fi is not joined to any network, Disabled that the adapter has been turned off. In the last case, re-enable it from PowerShell run as administrator, using the name shown in the Name column:
Enable-NetAdapter -Name "Wi-Fi"Step 3: test how far traffic gets
Without parameters, Test-NetConnection pings a Microsoft test server. The second test checks that an encrypted web connection (port 443) succeeds, which still tells you something when ping is blocked:
Test-NetConnection
Test-NetConnection -ComputerName www.microsoft.com -Port 443Look at PingSucceeded and TcpTestSucceeded: True means traffic gets through. To find where the connection stops, display the IP configuration, then test the gateway (the router) and an internet address:
ipconfig
ping 192.168.1.1
ping 1.1.1.1Replace 192.168.1.1 with the "Default Gateway" shown by ipconfig. An IPv4 address in 169.254.x.x means the device received no address from the DHCP server. Note that many corporate networks block ping, which is why the port 443 test matters.
Step 4: fixes on the Windows side
1. Troubleshooter. Type "Get Help" in the Start menu and run the Network and Internet troubleshooter. It fixes simple cases on its own.
2. Network commands. Open Command Prompt with Run as administrator and run, in this order:
netsh winsock reset
netsh int ip reset
ipconfig /release
ipconfig /renew
ipconfig /flushdnsnetsh winsock reset and netsh int ip reset reset the Windows network stack, ipconfig /release then /renew request a new IP address, ipconfig /flushdns clears the DNS cache. Then restart the device.
3. Network adapter driver. In Device Manager, expand Network adapters, right-click the adapter, choose Properties, then the Driver tab to note the version. First download the latest driver from the device manufacturer, then uninstall the device and restart: Windows reinstalls it.
4. Proxy. Chrome and Edge use the Windows proxy settings. Open Settings > Network & internet > Proxy: a forgotten manual proxy, or one left behind by unwanted software, cuts everything off. On a company device, change nothing without the IT department's agreement.
5. Last resort. Settings > Network & internet > Advanced network settings > Network reset. Windows removes and reinstalls the network adapters; you will need to re-enter Wi-Fi passwords and reinstall the VPN.
In a company: VPN, proxy and firewall
- VPN: some VPN clients block all traffic until the tunnel is up. A VPN that no longer connects (expired certificate, changed password) then produces ERR_INTERNET_DISCONNECTED. The VPN also has its own proxy settings, under Network & internet > VPN > Advanced options.
- Enforced proxy: when the proxy is deployed by Group Policy or by a configuration script, a device outside the company network may no longer reach anything.
- Firewall and security: a firewall rule, an antivirus, or a detection tool that isolates the device after an alert cuts the network on purpose. Check the security console before repairing anything.
- Several devices on the same site: if the error affects a whole floor, look at the switch, the Wi-Fi access point or DHCP, not the devices.
Symptoms, causes and fixes
| What you see | Likely cause | What to do |
|---|---|---|
Status is Disconnected | Cable unplugged, Wi-Fi not joined | Plug back in, reconnect, check airplane mode |
Status is Disabled | Adapter turned off | Enable-NetAdapter |
| IPv4 address in 169.254.x.x | No answer from DHCP | ipconfig /renew, restart the router or check the DHCP server |
| Gateway reachable, internet not | Router, provider, firewall | Restart the router, contact the provider |
| Internet reachable, browser in error | Proxy, VPN, Winsock | Check the proxy, netsh winsock reset |
| All devices on a site affected | Local network | Switch, Wi-Fi access point, DHCP |
For other frequent issues at the office, see our overview of common IT problems.
LongLife: spot the devices that drop off before the calls come in
This guide fixes one device. LongLife gives you the view across your whole fleet:
- measure: LongLife tracks the network quality of every device and includes it in the DEX score (startup, network, stability, satisfaction). Devices that lose the network stand out without waiting for a ticket;
- detect: detectors analyse your fleet continuously and suggest the recommended action, with its priority and the cost of doing nothing;
- locate: devices grouped by site and department show at once whether the problem affects one device or a whole floor;
- act remotely: a catalogue of signed scripts, written and tested by OPP! and expanded with every update, runs on the devices you choose, with a report for each device.
The free plan covers up to 15 devices. Estimate what you would gain with the simulator, or book a meeting to see your own devices in LongLife.
Sources
- Chromium, list of network error codes: chromium.googlesource.com
- Google, Chrome Help, fix connection errors: support.google.com
- Microsoft, fix Wi-Fi connection issues in Windows: support.microsoft.com
- Microsoft, use a proxy server in Windows: support.microsoft.com
- Microsoft, Get-NetAdapter documentation: learn.microsoft.com
- Microsoft, Test-NetConnection documentation: learn.microsoft.com
Frequently asked questions
What does ERR_INTERNET_DISCONNECTED mean?
The browser (Chrome, Edge or any Chromium-based browser) found that the device had no network connection when it tried to load the page. The website itself is not at fault: the problem is on the device or its network (cable, Wi-Fi, network adapter, VPN, proxy, firewall).
What is the difference with net::ERR_INTERNET_DISCONNECTED?
None. The net:: prefix appears in developer tools and in some Chromium-based applications. It is the same error code, number -106 in Chromium's list of network errors.
Is netsh winsock reset safe to run?
It restores the Windows Winsock catalogue to its default state and requires a restart. It can disable software that hooks into the network stack, such as some VPNs or security filters, which you may then need to reinstall. In a company, warn the team that manages those tools before running it.
Why does the error only appear when the VPN is off?
Some corporate VPN clients block all traffic until the tunnel is up, so that a device never reaches the internet unprotected. The browser then sees a device with no connection. Reconnect the VPN or ask the IT department whether this block is intended.
How much longer can your fleet last?
The simulator estimates in one minute the budget and CO₂ saved by extending your renewal cycle.